Winter changes where a vending machine should go. Most vending machines are built for heated indoor spaces, so a spot right inside a busy door, in an unheated vestibule or outdoors can cause problems in a Canadian January: frozen drinks, slow card readers, slushy floors and machines that work harder than they should. The good news is that a few placement choices solve almost all of it. We install and service machines across Canada for $0, with no contract, and we check the spot during a free site visit before anything is installed.
How cold affects a vending machine
A vending machine is designed to keep products at a steady temperature in a normal room. When the room itself gets very cold, or swings between warm and cold every time a door opens, a few things can happen:
- Drinks can freeze in an unheated space, which can burst cans and bottles.
- Chocolate and snacks can bloom or harden when they go through repeated warm and cold cycles.
- Screens and card readers can respond more slowly in the cold.
- Condensation can form when cold air meets a warm machine, which is hard on electronics.
- Salt and slush tracked in from outside can damage the base of a machine near a door.
Placement near entrances
Entrances are tempting because everyone walks past them. In winter, though, the first few metres inside a busy door are the coldest and wettest part of most buildings. A better choice is usually:
- Inside the heated area, past the vestibule or the second set of doors.
- Out of the direct draft, so the machine is not hit with cold air every time the door opens.
- Off the slush path, on a dry floor away from boot mats and salt.
- Still visible, so people can see it on the way in or out.
For more ideas on high-traffic spots that stay comfortable all year, see our guide to the best locations for a free vending machine.
Cold lobbies, loading docks and unheated spaces
| Spot | Winter concern | Usually better |
|---|---|---|
| Unheated vestibule | Freezing temperatures overnight | Just inside the heated lobby |
| Loading dock or shipping area | Open bay doors, cold drafts | The heated break room or lunchroom near the dock |
| Arena or rink lobby | Cold air from the ice surface | The heated lobby or concourse, away from the rink doors |
| Construction site trailer | Heat off overnight and on weekends | A trailer or site office that stays heated |
| Parking garage | Unheated, damp and salty | The building lobby or elevator area |
Industrial sites are where this matters most. If your break room is warm but the warehouse floor is not, the machine belongs in the break room. See our posts on warehouses and plants and arenas and recreation centres.
What about outdoor vending machines?
Most of the machines we place are indoors, and in most Canadian climates an indoor spot is the right answer for the reasons above. If you are thinking about an outdoor, covered or unheated location, such as a campground, a marina or a yard with no break room, tell us when you get in touch. We will look at the site during the free visit and tell you honestly whether it suits a machine, and what the alternatives are.
What sells in winter
Product mixes change with the season. In colder months, many sites see more demand for hot drinks, and a coffee machine with coffee, tea and hot chocolate becomes the most-used machine in the building. Snack machines and fresh and frozen meals help when staff would rather not go out in a storm at lunch. Because every machine has remote stock monitoring, we see the change in sales and adjust the mix and restocking to match.
Power and outlets in winter
Winter is also when buildings run space heaters, which can overload shared circuits. A vending machine should have its own standard outlet where possible, not one shared with heaters or kettles. See our vending machine space and power requirements for the details.
Frequently asked questions
Can a vending machine go in an unheated space?
Usually it is better not to. Most machines are designed for heated indoor spaces. Ask us about your site and we will check it at the free visit.
Will you move the machine if the spot is too cold?
Tell us. If a spot turns out to be a problem in the cold, we will look at a better one inside your building with you.
Do you install in winter?
Yes. Installation usually takes 3 to 5 business days after approval, all year round. We serve more than 2,100 cities and towns; find yours on our locations page.
Planning a machine for your building this winter? Request a free vending machine. We reply within one business day.


